HAVITAL- ALS 750
Aluminum Solid Raised Access Floor
The ALS750 is built from high-strength, die-cast pure aluminum panels, offering superior durability and structural stability. Designed for industries that require strict particulate control, its solid construction ensures long-lasting performance in demanding environments.
Featuring a smooth, non-porous surface, the ALS750 is easy to clean and maintain, making it an excellent choice for pharmaceutical, biotech, and semiconductor manufacturing facilities where hygiene, precision, and contamination control are essential.
Product Specifications
- Materials: Pure Cast Aluminum
- Installation: Rigid Pedestal and Stringer System
- Finish: HPL/PVC
- Corner Connection: free standing system & corner lock system
- Characteristics: Excellent thermal conductivity, load-bearing capacity, and recyclable properties.
System performance criteria
System performance criteria are crucial as they reflect the floor’s performance in a typical installation. While panel-only criteria like concentrated load are often used to specify systems, they can be misleading. These tests are conducted with panel testing blocks, not the actual understructure, and may not represent real-world condition
| Project Detail | Finish | System Resistance | Material | Concentrated Load | Ultimated Load | Uniform Load | Special Treatment |
| HLS300 | HPL/PVC | Conductive 1O4-1O6Ω or Static Dissipative 1O6-1O9Ω | Die-cast aluminum | 300kgf/6.45cm2 Deflection<=2.0mm | 600kgf/6.45cm2 | 600kgf/m2 Deflection<=1.0mm | Epoxy coating or Ni-Cr plating |
| HLS500 | HPL/PVC | Conductive 1O4-1O6Ω or Static Dissipative 1O6-1O9Ω | Die-cast aluminum | 500kgf/6.45cm2 Deflection<=2.0mm | 1000kgf/6.45cm2 | 1000kgf/m2 Deflection<=1.0mm | Epoxy coating or Ni-Cr plating |
| HLS700 | HPL/PVC | Conductive 1O4-1O6Ω or Static Dissipative 1O6-1O9Ω | Die-cast aluminum | 700kgf/6.45cm2 Deflection<=2.0mm | 1400kgf/6.45cm2 | 1400kgf/m2 Deflection<=1.0mm | Epoxy coating or Ni-Cr plating |
| HLS1000 | HPL/PVC | Conductive 1O4-1O6Ω or Static Dissipative 1O6-1O9Ω | Die-cast aluminum | 1000kgf/6.45cm2 Deflection<=2.0mm | 2000kgf/6.45cm2 | 2000kgf/m2 Deflection<=1.0mm | Epoxy coating or Ni-Cr plating |
| HLS1200 | HPL/PVC | Conductive 1O4-1O6Ω or Static Dissipative 1O6-1O9Ω | Die-cast aluminum | 1200kgf/6.45cm2 Deflection<=2.0mm | 2400kgf/6.45cm2 | 2200kgf/m2 Deflection<=1.0mm | Epoxy coating or Ni-Cr plating |
| HLS1500 | HPL/PVC | Conductive 1O4-1O6Ω or Static Dissipative 1O6-1O9Ω | Die-cast aluminum | 1500kgf/6.45cm2 Deflection<=2.0mm | 3000kgf/6.45cm2 | 3000kgf/m2 Deflection<=1.0mm | Epoxy coating or Ni-Cr plating |
| HLS2000 | HPL/PVC | Conductive 1O4-1O6Ω or Static Dissipative 1O6-1O9Ω | Die-cast aluminum | 2000kgf/6.45cm2 Deflection<=2.0mm | 4000kgf/6.45cm2 | 4000kgf/m2 Deflection<=1.0mm | Epoxy coating or Ni-Cr plating |
| HLS2500 | HPL/PVC | Conductive 1O4-1O6Ω or Static Dissipative 1O6-1O9Ω | Die-cast aluminum | 2500kgf/6.45cm2 Deflection<=2.0mm | 5000kgf/6.45cm2 | 5000kgf/m2 Deflection<=1.0mm | Epoxy coating or Ni-Cr plating |
| HLS3000 | HPL/PVC | Conductive 1O4-1O6Ω or Static Dissipative 1O6-1O9Ω | Die-cast aluminum | 3000kgf/6.45cm2 Deflection<=2.0mm | 6000kgf/6.45cm2 | 6000kgf/m2 Deflection<=1.0mm | Epoxy coating or Ni-Cr plating |
*A tests are performed using CISCA’s Recommend Test Procedures for Access Floors with the exception of Design Load
- Design Load: The design load is evaluated using the CISCA Concentrated Load Test method on the actual understructure rather than steel blocks. It is determined as the lesser value between half of the ultimate load or the load at which permanent deformation (yield point) begins.
- Safety Factor: The safety factor is calculated as the ratio of the ultimate load to the design load. International standards, along with Dawn Modular Floor guidelines, recommend a minimum safety factor of 2.
Aluminum Solid Floor Characteristics
Thermal Conductivity
Supports heat dissipation in environments with heat-generating equipment.
Convenient Maintenance
Non-porous, durable panels simplify cleaning and maintenance.
Recyclable and Economical
Aluminum panels are environmentally friendly due to their recyclability.
Dimensional Accuracy
Allows for precise installation and free interchangeability of panels.
Excellent Load Performance
Strong enough to support heavy equipment in clean rooms and data centers.
Class A Fire Resistance
Complies with flame spread and smoke development index standards.
Accessories for Aluminum Raised Floors
- Pedestals and Stringers
- Provide stability and precision, preventing vibrations and rocking panels.
- Custom Cutting
- Panels can be tailored to fit around permanent features with precision.
- Interchangeability
- Ensures that panels can be replaced or rearranged without compromising functionality.
Understructure Options
Standard All Aluminum Pedestal
Standard All Steel Pedestal
Heavy Duty Steel Span Structurer
