HAVITAL- ALS 750

Aluminum Solid Raised Access Floor

The ALS750 is built from high-strength, die-cast pure aluminum panels, offering superior durability and structural stability. Designed for industries that require strict particulate control, its solid construction ensures long-lasting performance in demanding environments.

Featuring a smooth, non-porous surface, the ALS750 is easy to clean and maintain, making it an excellent choice for pharmaceutical, biotech, and semiconductor manufacturing facilities where hygiene, precision, and contamination control are essential.

Product Specifications

Materials: Pure Cast Aluminum
Installation: Rigid Pedestal and Stringer System
Finish: HPL/PVC
Corner Connection: free standing system & corner lock system
Characteristics: Excellent thermal conductivity, load-bearing capacity, and recyclable properties.

System performance criteria

System performance criteria are crucial as they reflect the floor’s performance in a typical installation. While panel-only criteria like concentrated load are often used to specify systems, they can be misleading. These tests are conducted with panel testing blocks, not the actual understructure, and may not represent real-world condition

Project Detail	Finish	System Resistance	Material	Concentrated Load	Ultimated Load	Uniform Load	Special Treatment
HLS300	HPL/PVC	Conductive 1O⁴-1O⁶Ω or Static Dissipative 1O⁶-1O⁹Ω	Die-cast aluminum	300kgf/6.45cm2 Deflection<=2.0mm	600kgf/6.45cm2	600kgf/m2 Deflection<=1.0mm	Epoxy coating or Ni-Cr plating
HLS500	HPL/PVC	Conductive 1O⁴-1O⁶Ω or Static Dissipative 1O⁶-1O⁹Ω	Die-cast aluminum	500kgf/6.45cm2 Deflection<=2.0mm	1000kgf/6.45cm2	1000kgf/m2 Deflection<=1.0mm	Epoxy coating or Ni-Cr plating
HLS700	HPL/PVC	Conductive 1O⁴-1O⁶Ω or Static Dissipative 1O⁶-1O⁹Ω	Die-cast aluminum	700kgf/6.45cm2 Deflection<=2.0mm	1400kgf/6.45cm2	1400kgf/m2 Deflection<=1.0mm	Epoxy coating or Ni-Cr plating
HLS1000	HPL/PVC	Conductive 1O⁴-1O⁶Ω or Static Dissipative 1O⁶-1O⁹Ω	Die-cast aluminum	1000kgf/6.45cm2 Deflection<=2.0mm	2000kgf/6.45cm2	2000kgf/m2 Deflection<=1.0mm	Epoxy coating or Ni-Cr plating
HLS1200	HPL/PVC	Conductive 1O⁴-1O⁶Ω or Static Dissipative 1O⁶-1O⁹Ω	Die-cast aluminum	1200kgf/6.45cm2 Deflection<=2.0mm	2400kgf/6.45cm2	2200kgf/m2 Deflection<=1.0mm	Epoxy coating or Ni-Cr plating
HLS1500	HPL/PVC	Conductive 1O⁴-1O⁶Ω or Static Dissipative 1O⁶-1O⁹Ω	Die-cast aluminum	1500kgf/6.45cm2 Deflection<=2.0mm	3000kgf/6.45cm2	3000kgf/m2 Deflection<=1.0mm	Epoxy coating or Ni-Cr plating
HLS2000	HPL/PVC	Conductive 1O⁴-1O⁶Ω or Static Dissipative 1O⁶-1O⁹Ω	Die-cast aluminum	2000kgf/6.45cm2 Deflection<=2.0mm	4000kgf/6.45cm2	4000kgf/m2 Deflection<=1.0mm	Epoxy coating or Ni-Cr plating
HLS2500	HPL/PVC	Conductive 1O⁴-1O⁶Ω or Static Dissipative 1O⁶-1O⁹Ω	Die-cast aluminum	2500kgf/6.45cm2 Deflection<=2.0mm	5000kgf/6.45cm2	5000kgf/m2 Deflection<=1.0mm	Epoxy coating or Ni-Cr plating
HLS3000	HPL/PVC	Conductive 1O⁴-1O⁶Ω or Static Dissipative 1O⁶-1O⁹Ω	Die-cast aluminum	3000kgf/6.45cm2 Deflection<=2.0mm	6000kgf/6.45cm2	6000kgf/m2 Deflection<=1.0mm	Epoxy coating or Ni-Cr plating

*A tests are performed using CISCA’s Recommend Test Procedures for Access Floors with the exception of Design Load

Design Load: The design load is evaluated using the CISCA Concentrated Load Test method on the actual understructure rather than steel blocks. It is determined as the lesser value between half of the ultimate load or the load at which permanent deformation (yield point) begins.
Safety Factor: The safety factor is calculated as the ratio of the ultimate load to the design load. International standards, along with Dawn Modular Floor guidelines, recommend a minimum safety factor of 2.

Aluminum Solid Floor Characteristics

Thermal Conductivity

Supports heat dissipation in environments with heat-generating equipment.

Convenient Maintenance

Non-porous, durable panels simplify cleaning and maintenance.

Recyclable and Economical

Aluminum panels are environmentally friendly due to their recyclability.

Dimensional Accuracy

Allows for precise installation and free interchangeability of panels.

Excellent Load Performance

Strong enough to support heavy equipment in clean rooms and data centers.

Class A Fire Resistance

Complies with flame spread and smoke development index standards.

Accessories for Aluminum Raised Floors

Pedestals and Stringers
- Provide stability and precision, preventing vibrations and rocking panels.
Custom Cutting
- Panels can be tailored to fit around permanent features with precision.
Interchangeability
- Ensures that panels can be replaced or rearranged without compromising functionality.